MD-Textil Tactical Mission Jed Belt Hybrid black

The Jed Belt is a tactical mission belt made in Germany. The double layer of webbing creates a good balance of strength and comfort. Thanks to the Velcro hook-and-loop fastener on the inside, the excess length can be easily rolled up and secured. The Molle system on the outside ensures that equipment can be easily attached to the Jed Belt Hybrid. Since the locking ring is integrated directly into the buckle, both locking devices must be actuated to open the belt. This ensures that it does not accidentally break open under load. This robust belt convinces with an enormously high load limit of 3100 kg.

- Handmade in Germany
- Cobra-Buckle 7075 CNC milled safety lock, breaking load with linear load 18 KN, in the ring 36 KN
- Class 7a seat belt webbing with a breaking load of 2700kg according to MIL-W-4088
- Width: approx. 43 mm, thus suitable for almost any service pants
- Unilateral opening is not possible, both locking devices must always be operated together
- No opening under load, the lock can only be opened when no pressure is on the buckle

Proceed as follows to determine the correct size:
Wear the pants that you want to wear with the Jed Belt. Pull a measuring tape through the belt loops and read off the waist measurement.
If you want to use the belt over clothing or as a battle belt, the measuring tape must be measured at the appropriate place. If you want to wear the belt as a system with a inside belt, please order one size larger to compensate for the difference in circumference of the inner belt.

Please note that despite the high strength, the Jed Belt is still NOT a belt for securing of yourself or others or a replacement for PPE.