Cop Deployment and Access Glove FG10TS black

The Cop Deployment and Access Glove FG10TS is a real all-rounder. It has cut and puncture protection on the inside of the hand. It is also flame retardant and has impact protection on the upper knuckles. The FG10TS Response Glove provides protection against sharp and blunt object injuries, as well as heat and fire. The top of the glove is made from a lightweight synthetic fiber with a silicone coating making it both flame retardant and abrasion resistant. The inside made of the finest leather protects the hand and allows for good handling, for example during searches, putting on handcuffs and operating firearms.
The material is reinforced in the knuckle area to protect against thrown objects and hits. Plastic reinforcement on the top of the hand and leather reinforcement on the knuckles also cover the normally unprotected area under a forearm protector. Thumb and forefinger are equipped with a touchscreen function to meet the requirements of modern day missions.

Test according to EN388:2016:
- Abrasion resistance: Category 2
- Cut resistance (COUP): Category 3
- Tear resistance: Category 2
- Puncture resistance: Category 2
- Cut resistance (TDM): Category B
- Impact protection: P

tested according to EN407:2004:
- Burning behavior: Category 4
- Contact heat: Category 2
- Convective heat: Category 4
- Radiant heat: Category 4
- Resistance to small liquid metal splashes: category X
- Resistance to large amounts of liquid metal: category X

Material:
- Outer: 50% Leather, 45% Para-Aramid, 3% Polyester, 2% Rubber
- Inside: 100% para-aramid

Care instructions: Depending on the intensity of use and how dirty the material is, we recommend hand washing. A dirty surface can, among other things, impair the touchscreen function of the glove. We also recommend increasing the sensitivity of the touch display on the device so that input is easier.