Lindnerhof Tactical Plate Carrier HL044 coyote

The newly developed HL044 plate carrier from Lindnerhof relies on tried and tested features with a new look. In addition to rescue grips, the carrier has large Hook and Loop surfaces and a quick release system. The skeleton stomach belt can be adjusted to the wearer. The sides of the waist belt are connected on the back with a crisscrossed rubber cord. Internal Hook and Loop loop surfaces allow additional accessories to be attached. On the front part of the carrier there are 2 back to back cable fixations points for drinking tubes or communication equipment. The insert for ballistic plates is based on the dimensions of the SAPI plates in sizes M and L. With the help of an integrated plate strap for hard ballistics, smaller plates such as NATO standard plates (25 / 30cm) can also be used.

- Quick release system (hook buckle)
- Manufactured according to TL of the German Bundeswehr

Components (both sizes):
Front:
Webbing 20 mm
Webbing 25 mm
Edging 19 mm
Hook tape 25 mm
Hook tape 38 mm
Hook and Loop tape 20 mm
Hook and Loop tape 50 mm
Hook and Loop tape 100 mm
Hook buckle 40 mm
Hook buckle 100 mm
Label
Hook and Loop back to back
Dabond (thread)


Back
Webbing 20 mm
Webbing 25 mm
Hook tape 25 mm
Hook tape 50 mm
Hook tape 38 mm
Hook tape 100 mm
Hook and Loop tape 20 mm
Hook and Loop tape 25 mm
Hook and Loop tape 50 mm
Hook and Loop tape 100 mm
Square ring 50 mm
Label
Dabond (thread)

- Dimensions: L 34.3 x 26.5 x 0.38 cm, XL 37 x 28.5 x 0.40 cm
- Material: Front: hybrid laminate (front side), Cordura 500 (side part), Hook and Loop loop by the meter (to the body side), 3-D knitted fabric 3.0mm (to the body side); Back: hybrid laminate (front), Cordura 500 (side part), Hook and Loop loop by the meter (to the body side), 3-D knitted fabric 3.0mm (to the body side), pack sack fabric (to reinforce the 3-D knitted fabric)